Particle swarm torus logo reveal
Particle logo reveal: a swarm of glowing motes rolls into a torus, then snaps into your mark. Copy the prompt into Claude and add your brand name.
Two hundred thousand motes of light fly like a starling flock, first close inside the swarm, then seen whole from a high wide shot. The ribbon curls into a spinning torus, inhales to a white-hot point and snaps out into the logo, with the brand name etched in light beneath. One take, no cuts.
Change the brand name, the mote glow colour, the accent used for the flash, core, etching and sparks, and the void background colour. At nine seconds and 16:9, it suits tech, data and AI company intros, conference openers and product launch videos that need a dark, cinematic logo moment.
Use it for
- Tech company logo sting
- Conference opener bumper
- Product launch title card
Specs
- Length: 9 seconds
- Format: widescreen 16:9 (1920x1080), 30 fps
- Built with: Three.js in HyperFrames
- Category: Logos
What happens, beat by beat
- 0.0 to 1.6 s: inside the flock. The camera starts low inside the swarm, rolled about -0.45 rad. A long folding ribbon of motes sweeps diagonally across frame; near motes are big soft bokeh discs. Sheets…
- 1.6 to 3.2 s: crane up and back. The camera rises to a high wide shot (about 15 up, 45 back) so the whole C-shaped murmuration reads as one silhouette. Cap defocus here so the shape…
- 2.8 to 4.4 s: roll-up. The ribbon's cross-section curls into a tube while its arc closes into a full ring, settling on frame centre by 4.2 s. The ring then stands up to face the camera…
- 4.4 to 5.3 s: the torus spins. Toroidal and poloidal spin together give helical flow. A long stylised shutter turns every mote into a clean helical light trail.
- 5.3 to 5.93 s: inhale. The radius shrinks from 2.5 to 0.6 to almost nothing, spin speeds up as 1/R², and a white-hot core glow grows in the centre. Hold the hot point for two frames.
- 6.0 s: snap. Peach flash, a thin ice-blue anamorphic streak, a visible peach-white shockwave ring, and the camera recoils with a short damped shake. Every mote springs from the core to its place in the logo…
- 6.08 to 6.95 s: wordmark etch. One hairline scan line appears as a point at the centre, just under the baseline. Its white-hot tips run outwards (ease-out) with a peach glow and falling sparks. The letters…
- 7.4 to 9.0 s: lockup. Mark about 40% of frame width with the wordmark centred below, slow camera push in. Ring motes orbit slowly along their circles at their own pace and twinkle. One glint, a…
Fake the camera optics per mote
- Depth of field. Circle of confusion from depth against focus; blend each quad from a soft Gaussian (small) to a rim-lit bokeh disc (large). Keep each mote's total light constant…
- Motion blur. Evaluate position at t and t minus the shutter through two camera matrices and stretch the quad into a capsule between them, dividing brightness along it. Shutter 1/60…
- Camera. FOV 30, Hermite spline through keyed position, target and roll; snap recoil and shake added analytically.
What you can change
- Expose brand name (up to 12 characters, auto-fitted), glow, accent and background colours as variables. Swap the logo by editing the circle list (centre and…
How the prompt opens
Make a silent 9-second, 16:9 (1920x1080, 30 fps) logo sting in Three.js. 200,000 motes of light fly like a starling murmuration through a dark sky, roll themselves up into a spinning torus, inhale to a white-hot point, and snap out into [your logo: built from simple circles, e.g. three overlapping rings forming a cloud for a brand called Nimbus] while [your brand name] is etched in light underneath. One continuous camera take, no cuts, no fades to black.
The full prompt runs 1,092 words. Copy it free (2 a day) from this page.
Copy the prompt into Claude, or pull the scene into Claude Code and render the MP4 on your machine: how it works.